Sterling Gun Drills Media Releases
Product - TH-38 Rotary Coolant Feed Toolholder
TH-38 Rotary Coolant Feed Toolholder RS-57 and RS-58 Reduction Sleeves
Sterling Gun Drills announce a new Rotary Toolholder and Reduction Sleeves.
The TH-38 Rotary Toolholder has a 1" straight shank with a 1 1/4" bore. Two Reduction Sleeves, RS-57 and RS-58 reduce the toolholder's 1 1/4" bore to 3/4" & 1" respectively. List price is $759.00 for the toolholder and $99.00 each for the sleeves.
The TH-38 toolholder is suitable for use with our DM2000 and DM3000 Spraymist Kits and is also capable of supporting direct oil or oil based water soluble coolant to a pressure of 250 - 300 psi. For the first time Sterling offers a true "inch" series Rotary Toolholder to fit standard gun drills from 1/8" to 1" when used with the RS-57 and RS-58 Reduction Sleeves.
Examples:TH-38 Rotary Toolholder, no sleeve: .751" to 1.00" diameter standard gun drills with 1 1/4" driver
with fitted RS-57 Reduction Sleeve: .125" to .500" diameter standard gun drills with 3/4" driver
with fitted RS-58 Reduction Sleeve: .501" to .750" diameter standard gun drills with 1" driver
To use this toolholder, gun drills greater than 1" diameter must be ordered with a 1 1/4" driver (ref. "D"). If used with our Spraymist System, drill diameters over 1 1/8" must be ordered with "inner tube construction".
Doug Holley, General Manager
Sterling Gun Drills, Inc. North Bennington, VT.
Toll Free: (888) 338-1049 • Phone: (802) 442-3525 • Fax: (802) 442-6225
Company Website: www.SterlingGunDrills.com
